The DIN1480 Turnbuckle With Hook&Eye adjusts the tension and effective length of a compatible wire or tie assembly. One hook end and one eye end provide the two connection interfaces. For static tensioning only. Not for lifting loads.
The DIN1480 Turnbuckle With Hook&Eye adjusts the tension and effective length of a compatible wire or tie assembly. One hook end and one eye end provide the two connection interfaces.
![]()
| THREAD mm | L1 mm | L2 mm | L3 mm | b1 mm | L5 mm | L4 mm | d1 mm | TOLERANCE mm | WEIGHT(KG) | |
| M5 | 70 | 48 | 60 | 6.7 | 53 | 113 | 8.5 | ±1 | 0.05 | |
| M6 | 110 | 85 | 85 | 8.5 | 80 | 165 | 10 | ±1 | 0.09 | |
| M8 | 110 | 79 | 98 | 11 | 84 | 182 | 10 | ±1.5 | 0.14 | |
| M10 | 125 | 88 | 109 | 14.5 | 102 | 211 | 14 | ±1.5 | 0.26 | |
| M12 | 125 | 85 | 127 | 15.3 | 119 | 246 | 17 | ±2 | 0.37 | |
| M14 | 140 | 90 | 141 | 18.5 | 122 | 263 | 18 | ±2 | 0.59 | |
| M16 | 170 | 116 | 175 | 19 | 145 | 320 | 22 | ±3 | 0.89 | |
| M20 | 200 | 130 | 170 | 20.5 | 167 | 367 | 24 | ±3 | 1.60 | |
| M22 | 220 | 145 | 185 | 26 | 167 | 398 | 27 | ±5 | 2.28 | |
| M24 | 255 | 170 | 205 | 26 | 205 | 447 | 27 | ±5 | 2.57 | |
| M30 | 255 | 160 | 225 | 33 | 255 | 512 | 31 | ±5 | 4.20 | |
| M36 | 295 | 180 | 255 | 44 | 276 | 568 | 43 | ±5 | 7.30 |
Static cable tensioning, stays and securing arrangements.
Use limitation: For static tensioning only. Not for lifting loads.
To request DIN1480 Turnbuckle With Hook&Eye, please specify thread diameter and pitch, body length, end fittings, adjustment range and finish. Include the quantity, delivery destination and any packaging or documentation requirements so our team can confirm the available configuration.
Throughout more than 23 years, has built an enviable reputation as a leading supplier of rigging hardware products, chains and steel wire rope accessories.
These DIN 1480 hook & eye turnbuckles are properly made. Hook is a full 180° — won't slip off the thimble. Eye is drilled clean, no burrs
We used these OC type turnbuckles for our construction project. Meets DIN1480 standard. Strong load‑bearing, hook and eye fit perfectly. Well‑packaged, no defects on arrival. Reliable supplier.
Dongxing , Huanxiu Sub-district Office, Jimo, Qingdao Shandong, China.
Copyright © 2025 Qingdao Xiangsheng Hardware Machinery Co.,Ltd., All Rights Reserved.
Powered by HiCheng.